Beschreibung
Intake manifold Stage6 High Flow MK2 AM6 and Derbi
Stage6 intake to get the maximum performance out of your Minarelli AM6 or Derbi engine: Stage6 R/T High Flow 28mm Derbi / AM6 intake manifold for Dellorto, Polini CP, Mikuni and PWK carburetors with a diameter of 19 to 28 mm.
Design Stage6 intake flange 19 - 28 mm
The high flow intake manifold is made of high-quality aluminum, the flawless finish was achieved by using the most advanced CNC technology. The intake manifold is anodized in color and features the familiar Stage6 laser-engraved logo.
The High Flow intake manifold is ideal for tuning and racing; it is slightly wedge-shaped to allow using a larger carburetor. Thanks to the tilted angle, the carburetor can be readjusted on the left side of your vehicle and aligned in ways to make room for a larger intake with a larger racing air filter.
This is not the only special feature of this intake manifold: it is supplied with two aluminum inserts / reducers, one round (28 mm diameter) and one conical insert. These interchangeable inserts allow the intake manifold to be perfectly adapted to the stuffer of the reed valve.
Advantages of Stage6 intake manifold am6 derbi
In terms of performance, the High Flow intake manifold has a few key advantages: gas flow is improved, and the option of a better, unobstructed air filter placement improves air intake. This results in stable, improved acceleration and generally better output.
For even more power, we recommend combining the inclined Stage6 High Flow intake manifold with a Stage6 5mm spacer, which is placed under the reed valve.
Attention!
The intake manifold is supplied without a rubber adapter for the carburetor, you can choose the right adapter depending on carburetor type and size:
To ensure a perfect seal, we recommend the use of silicone sealant.
Details Stage6 slanted intake manifold for Derbi and AM6
- Inclined intake manifold
- Without intake rubber
- Without screws
- Including 2x inserts
- Screw spacing base plate: 60 x 39.50 mm
- Screw spacing intake rubber: 60 mm
- Inner diameter: 28 mm
- Material: Aluminum
- Color: Yellow
Ansaugstutzen bei Roller, Motorrad, Moped und Mofa
Der Ansaugstutzen spielt eine wesentliche Bestandteil des Einlasssystems, er leitet das Benzin-Luft-Gemisch zum Zylinder. Hier die wichtigsten Arten von Ansaugstutzen:
Ansaugstutzen mit Gummiflansch
Ansaugsutzen mit flexiblem Ansaugummi sind ist die gängigste Variante. Es werden flexible Materialien wie Gummi oder Silikon verwendet, wodurch die Vibrationen des Motors absorbiert werden. Diese Flexibilität verringert das Risiko von Rissen oder Lecks. Außerdem lässt sich das Ansaugrohr durch die flexible Montage leicht an verschiedene Motor-Setups anpassen.
Ansaugstutzen mit Steckflansch
Diese starr montierten Ansaugstutzen werden eher bei Vintage Rollern, Klassik Motorrädern oder Mofas verwendet. Die Ansaugflansch besteht meist aus Metall, was eine größere Stabilität und Widerstandsfähigkeit gegen Verformungen gewährleistet. Die starre Steckflansch-Montage gewährleistet auch eine präzisere Ausrichtung des Ansaugstutzens mit dem Vergaser.
Drehbarer Ansaugstutzen
Drehbare Ansaugstutzen werden häufig bei 50ccm Motorrädern / Schaltmoped verwendet. Sie bieten größere Flexibilität bei der Montage, so dass die Ausrichtung des Vergasers an die jeweiligen Bedürfnisse angepasst werden kann.
Hinweis: Der Durchmesser des Ansaugstutzens muss zur Ansaugstutzen Anschlussweite des Vergasers passen!
Intake Manifold AM6 / Derbi Stage6 High Flow MK2 28mm Yellow | |
---|---|
Artikel-Nr. | S6-3318807/YE |
EAN | 4051272039928 |
Gewicht | 0,20 kg |
Brand | Stage6 |
Product type | Intake manifold |
Intake material | Aluminium |