Intake Kit PWK 28mm V2 Motoforce Racing Derbi / AM6
Beschreibung
Racing intake AM6 and Derbi
Complete Motoforce Racing intake kit for tuned 50cc motorcycles with Derbi or Minarelli AM6 engine (70 - 80 cc racing setups).
The 28mm intake system includes:
- Racing carburetor PWK 28mm, charcoal - orange
- Intake manifold AM6 / Derbi
- Reed valveAM6 / Derbi
- Air filter PWK D. 50mm, orange
Advantage of complete system vs. individual components
We've put together this package to save you time and headaches when tuning your intake system. This pack allows upgrading the intake system of your two-wheeler in one go and improve its performance noticeably. The components fit together perfectly, so you don't have to worry about fitments, mount and you're ready to go.
Performance 28mm intake kit
The installation of a larger carburetor, in this case a PWK 28mm carburetor, is recommended for tuning projects of all kinds. PWK carburetors are tuning carburetors that are primarily intended for racing and therefore do not have a vacuum / oil port.
The carburetor is equipped with a fuel inlet, a chrome-plated flat slide, a Powerjet jet, a large float chamber and a lever choke. The V2 version has an charcoal carburettor body with orange anodized CNC aluminium cover and orange anodized float chamber screw.
The intake kit with 28mm carburetor is generally suitable for 70 - 80 cc racing setups.
High-quality intake components for maximum performance
The performance of the carburetor is supported and optimized by other suitable add-on parts:
Motoforce Racing air filter 50mm: This pod air filter will optimize the air supply so the cylinder filling is better, so that your tuning cylinder develop its full potential.
MotoForce Racing intake manifold PWK: The MotoForce Racing intake manifold is made of hard rubber and has four elongated holes for perfect installation on Minarelli AM6 and Derbi engines. This vulcanized rubber is resistant to hydrocarbons and provides an excellent seal for the intake tract. A reinforcement is fitted to the back of the intake manifold to support the weight of the PWK carburetor.
Motoforce Racing Evo reed valve with 4 reed petals: This reed valve has been specially developed for plug & play installation in AM6 and Derbi engines, with no modifications required thanks to the use of slotted holes. The "V" design and the Venturi stuffer optimize cylinder filling and thus improve throttle response. Supplied with 2 paper gaskets.
Einlass für Roller, Motorrad und Mofa
Der Einlass beim 2-Takt Motor setzt sich aus einer Reihe von Teilen, die die Verbindung zwischen Vergaser oder Einspritzeinheit und Motor herstellen. Ziel ist es dabei, die Komponenten so zusammenzustellen, dass es zu einer besseren Füllung des Zylinder führt.
Das Einlasssystem eines 2-Takt Rollers oder Motorrads besteht aus:
- Ansaugstutzen
- Membranblock
- Manchmal mit Spacer / Sockel
Was bringt ein Tuning Einlasskit?
Im Allgemeinen führt der Einbau eines optimierten Einlasskits zu einem geraderen Einlass zum Motor und vergrößertem Volumen des Ansaugtrakts, um Gemischfluss und Füllungsgrad des Motors zu verbessern. Die Membranplättchen sind meist aus Faserstoff oder Karbon, die das Ansprechverhalten und die Spitzenleistung des Motors verbessern.
Hinweis: Der Einbau eines Einlasskits ist oft eine Ergänzung beim Einbau eines größeren Vergasers sowie bei Verwendung eines Sport Luftfilters. Immer daran denken, die Vergasereinstellungen zu überprüfen und dafür zu sorgen, dass das System vollständig abgedichtet ist.
| Intake Kit PWK 28mm V2 Motoforce Racing Derbi / AM6 | |
|---|---|
| Artikel-Nr. | MS-PKMINTAKE02 |
| Gewicht | 0,68 kg |
| Brand | MotoForce Racing |
| Product type | Intake kit |
| Carburator type | PWK |
| Diameter carburetor | 28mm |
| Intake material | Rubber |
