Beschreibung
cable starter Piaggio Ciao
This black pull starter is specially designed for Piaggio Ciao models with mono or variator drive and is supplied ready for installation. It is ideal for racing and can withstand the highest loads.
Note: The installation of the pull starter makes the pedal mechanism inaccessible, as the pedal arms rest against the housing of the pull starter. Alternative options such as footrests, a longer pedal axle or a pedal axle extension are therefore required.
Fitting the pull starter
Starter pinion
- Preparation: Clean all mounting surfaces thoroughly.
- Installation: Screw the appropriate counterpart for the pull starter onto the clutch or variator.
- Securing: Apply liquid locking agent, e.g. Loctite, to reliably secure the flange nut.
Cable starter
- Adapter: First screw the housing adapter to the engine finger-tight using the enclosed engine screws.
- Pull starter: Add the draw-wire starter unit to the round housing and fasten with the M5x45mm screws supplied.
- Final assembly: Finally, tighten the motor screws.
Starting procedure
- Before each start, pull the cable slowly a few times to allow the motor to turn without strain.
- Hold the handle firmly and pull until resistance is felt.
- Complete the starting process with a firm pull.
Tip: Gloves improve grip and ensure a secure hold.
Startermotor
Anlasser oder Starter sind noch gar nicht so lange gang and gäbe, heute findet werden sehr viele Zweiräder mit einem Elektroanlasser gestartet.
Bei Fahrzeugen, die alternativ auch mit Kickstarter gestartet werden können, ist der Ausfall des Startermotors weniger tragisch, aber da es immer weniger Fahrzeuge mit Kickstart-Option gibt, muss der Anlasser immer einwandbrei funktionieren.
Anlasser Defekt - was tun?
Wenn der Motor nicht startet und er Motoranlasser sich nicht dreht, liegt es nicht unbedingt daran, dass der Anlasser defekt ist. Erst einmal solltet ihr weitere Fehlerquellen ausschließen:
- Batterie mit einem Multimeter checken, sie muss mehr als 12 V anzeigen.
- Anlasserrelais prüfen: Klack-Test reicht nicht aus, es muss mit einem Multimeter getestet werden.
- Um den Anlasser zu testen, müsst ihr das Relais überbrücken und prüfen, ob sich der Anlasser dreht.
Natürlich kann es auch komplexere Probleme geben. In diesem Fall solltet ihr euch an eine Fachwerkstatt wenden.
Pull Starter swiing black Piaggio Ciao | |
---|---|
Artikel-Nr. | MOF-43868 |
EAN | 4057237640987 |
Gewicht | 0,77 kg |
Brand | Swiing |
Product type | Starter motor |