Silicone Sealant CAF 4 100g white
Beschreibung
CAF 4 high temperature silicone for engine and exhaust
White CAF 4 sealing paste for bonding and sealing mechanical parts, especially in areas with very high temperatures. CAF4 sealant remains fluid and allows you to take your time when assembling parts.
CAF4 is a one-component silicone elastomer that cures at room temperature. It is self-leveling, fast curing, has very good mechanical properties, good thermal stability and ensures good electrical insulation (dielectric).
If this product is not right for you, you will find a large selection of sealants on our website.
Advantages of CAF4:
- Easy processing due to adapted viscosity
- Good heat resistance
- Chemical resistance
- Non-stick properties
- Excellent ageing resistance
- Dielectric properties
technical specifications joint sealant CAF 4:
- Setting time: 10 minutes
- Curing time: 5 hours
- Application range: - 65 °C to + 250 °C
- Strength: 3.8 MPa
- Applications: Engine and exhaust
- Color: White
Area of application CAF 4 sealing paste
Due to its properties as a flowable silicone elastomer that vulcanizes at room temperature and is mainly intended for various industrial purposes, CAF 4 remains a must for industrial applications such as bonding and sealing between materials of the same or different types.
CAF 4 sealant is mainly used for various industrial purposes, such as flexible bonding and sealing of materials, fabric conduction for non-stick and thermal protection, electrical insulation and protection of electronic components.
It can be used to bond plastics and EVC silicones, to coat cylinders, to coat fabrics to protect robot arms, to protect/insulate joints of electrical components, to repair seals on pipelines and for thermal insulation.
How is CAF 4 joint paste used?
CAF 4 joint paste is supplied ready for use and can be applied by hand or using suitable application equipment. It is recommended that the paste is applied to clean and dry surfaces.
To bond materials, one of the two parts should be glued together and the other then fitted as quickly as possible. After joining, do not load immediately as the curing time depends on the thickness of the material used.
Cross-linking can be accelerated by increasing the temperature to a maximum of 160 °C with dry heat.
Our recommendations for the effective use of CAF4:
- Ensures surfaces are clean and free of grease before application.
- Use a small amount of paste as a large amount is not necessary.
- Assemble the elements according to the manufacturer's instructions.
- Use the assembled elements within 10 minutes after assembly
Dichtmasse
Wie der Name schon sagt, dient Dichtmasse der Abdichtung von Komponenten. Es gibt verschiedenen Marken, Zusammensetzungen, Einsatzgebiete, Farben und mehr oder weniger hitzefeste Arten.
Flüssigdichtungen und Silikon Dichtmasse sind zwar ein absolutes Must-have für jede Werkstatt, sind aber nur in bestimmten Fällen wirklich notwendig. Meistens sind sie in erster Line Pannenhilfe und ersetzen keine echte Reparatur.
Daher ist es in der Regel besser, die vorgesehenen Spezial Dichtungen zu verwenden, auch wenn Silikon und Dictmasse zusätzlich beim Abdichten helfen.
Bitte beachtet, dass Dichtmasse und Kit nicht überall eingesetzt werden kann! Sie können zum Beispiel keine Wellendichtringe oder O-Ringe ersetzen.
1 Classification of the substance or mixture
The product has been classified according to the legislation in force.
Classification according to (EC) Directive 1272/2008 as amended.
Health hazards
Eye Irritation - Category 2 - H319: Causes severe eye irritation.
Specific target organ toxicity - repeated exposure - category 1 - H372: Causes damage to organs through prolonged or repeated exposure.
2 Label elements
Signal word(s): Warning
Hazard statement(s): H319: Causes severe eye irritation.
Safety advice
Prevention: P280: Wear protective gloves/protective clothing/eye protection/face protection.
Reaction:
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue to rinse.
P337+P313: If eye irritation persists: Get medical advice/attention.
Hazard summary
Physical Hazards: No specific recommendations.
Health Hazards
Inhalation: Quartz/Cristobalite : Fibers entrapped in polymer are not expected to present a health hazard as long as they are handled under normal conditions of use
normal conditions of use. Although the product is classified according to EU criteria, according to Article 23 and Annex
1 (Section 1.3.4.1) of Directive n°1272/2008, no labeling is required.
Eye contact: Causes severe eye irritation.
Skin contact: No information on specific symptoms.
Ingestion: No information on specific symptoms.
Other health effects: No data on further information.
Environmental hazards: Not considered to be hazardous to the environment.
3 Other hazards
Meet PBT (persistent/bioaccumulative/toxic) criteria
Meet vPvB criteria
| Silicone Sealant CAF 4 100g white | |
|---|---|
| Artikel-Nr. | EKP-8791 |
| EAN | 3700948127391 |
| Gewicht | 0,12 kg |
| Brand | CAF |
| Product type | Sealing paste |