Beschreibung
Stage6 Torque Control MK2
The Torque Control MK2 is the improved version of the very successful Stage6 Torque Control clutch, with reinforced back plate, larger linings and slightly heavier clutch shoes.
Adjusting the Stage6 Torque COntrol clutch
The advantage of this clutch is that the springs can be adjusted and replaced without having to dismantle the entire unit.
The springs are held in place by screws, which you can simply tighten or loosen through the pre-formed holes in the Stage6 R/T clutch bell. If the clutch is fitted with a different clutch bell, you will need to remove the bell, but the actual clutch does not need to be removed from the rear pulley. Each spring can be precisely adjusted using the scale on the adjusting screws for infinitely variable spring preload.
Additional clutch weights Stage6 Torque COntrol
The Stage6 Torque Control MK2 clutch allows adding weights to influence not only the speed in which the clutch engages speed but also the aggressiveness of the clutch engagement process. For racing scooters, a smooth clutch engagement is more important in order to be able to accelerate optimally at an angle, whereas for fun scooters, a more aggressive engagement is required to enable wheelies. Both options are possible with Torque Control. The heavier the weights and the further out they are placed, the more aggressively the clutch will engage.
The Stage6 Torque Control MK2 clutch provides spectacular grip and fantastic acceleration.
Clutch springs Stage6 Torque COntrol
The choice of clutch spring depends on the cylinder and setup. We recommend white springs for entry level tuning cylinders, orange springs for racing cylinders and separately available red springs for high-end cylinders. For very heavily tuned engines, there is also a weight set to further increase the weight of the clutch shoes.
Which scooters are compatible with the Stage6 clutch?
The Stage6 clutch fits scooters with Piaggio engines (Zip), Minarelli horizontal (Yamaha Aerox / Malaguti), Minarelli vertical (Yamaha BW's), Peugeot horizontal (Ludix), Peugeot vertical (Speedfight), 2-stroke Chinese scooters (with 107mm bell), etc.
The Torque Control clutch is not intended exclusively for racing, but can also be used as an OEM quality replacement for the standard clutch thanks to its versatile adjustment options.
Contents Stage6 clutch:
- Clutch springs Sport Stage6 White
- Clutch springs Racing Stage6 Orange
- Adjustment weights
- Two wrenches for adjusting the springs
Stage6 Torque Control
Torque Control steht für "Drehmomentkontrolle", d.h. vor allem die Kontrolle über die Kraftübertragung. Die Torque Control Reihe von Stage6 besteht aus High-End Kupplungen und Kupplungsteilen für 50ccm Roller.
Die Stage6 Torque Control Kupplung ist eine verstärkte und einstellbare Racing Kupplung. Die Torque Control ist separat und als komplettes Kit erhältlich, auch alle Ersatzteile können nachgekauft werden, um die Kupplung zu warten / zu reparieren oder die Kupplung neu einzustellen:
- Optionale erhältliche verstärkte Kupplungsbacken
- Federn in verschiedenen Härtegraden
- Schrauben und Muttern
- Gewichte
- Grundplatte
- Kompletter Satz mit Kupplungsglocke ...
Roller Kupplung
Die Kupplung ist für den reibungslosen Ablauf der Rollervariomatik unerlässlich. Sie sorgt dafür, dass die Motorleistung stufenlos und kontrolliert auf das Hinterrad übertragen wird.
Funktionsweise RollerKupplung
Kupplung und Kupplungsglocke der Fliehkraftkupplung bei Rollern bilden eine Einheit. Die Kupplungsglocke ist an der Eingangswelle des Motors befestigt. Wenn der Motor eine bestimmte Drehzahl erreicht, werden die Kupplungsbacken mit den Belägen durch die Fliehkraft nach außen gezogen. Dies führt zum Kontakt bzw. Kraftschluss zwischen Kupplung und Glocke, wodurch die Kraft vom Motor auf das Hinterrad übertragen werden kann.
Roller Kupplung einstellen
Bei Rollern handelt es sich um Fliehkraftkupplungen, die Fliehkraft bei steigender Drehzahl sorgt für den Kraftschluss. Die Kupplungsfedern spielen in diesem Prozess eine wichtige Rolle, da sie die Motordrehzahl beeinflussen, bei der die Kupplung einkuppelt, also Kontakt zur Glocke bekommt.
Die Kupplung greift bei weichen Federn bei einer niedrigeren Motordrehzahl, während harte Federn den Kuppelzeitpunkt verzögern. Es ist wichtig, den optimalen Kompromiss im Hinblick auf Setup und Einsatzzweck zu finden.
Präzisere Einstellungen können mit einer einstellbaren Kupplung umgesetzt werden, bei der die Spannung der Kupplungsfedern angepasst werden kann.
Für stressfreie Montage und Demontage von Kupplung und Getriebeteilen führen wir eine große Auswahl an Spezialwerkzeug.
Kupplung wechseln
Racing Clutch Stage6 Torque Control MK2 107mm | |
---|---|
Artikel-Nr. | S6-5016618 |
EAN | 4051272244292 |
Gewicht | 0,75 kg |
Series | Torque Control |
Brand | Stage6 |
Product type | Clutch |
Clutch diameter | 107mm |